Rohde Schwarz Rohde & Schwarz HMO1002 2-channel oscilloscope, Digital Storage oscilloscope, 사용자 매뉴얼

차례

• General information regarding the CE marking

  2
• 1 Installation and safety instructions

  4
• 1.1 Symbols

  4
• 1.2 Setting up the instrument

  4
• 1.3 Safety

  4
• 1.4 Intended Operation

  4
• 1.5 Ambient conditions

  5
• 1.6 Warranty and repair

  5
• 1.7 Maintenance

  5
• 1.8 Measuring Category

  5
• 1.9 Mains voltage

  6
• 1.10 Batteries and rechargeable batteries / cells

  6
• 1.11 Product Disposal

  6
• 2 Introduction

  7
• 2.1 Front view

  7
• 2.2 Control panel

  7
• 2.3 Screen

  8
• 2.4 General Operating Concept

  8
• 2.5 Basic Settings and Integrated Help

  9
• 2.6 Updates to Instrument Firmware, Language and Help

  9
• 2.7 Options / Voucher

  9
• 2.8 Self Alignment

  10
• 2.9 Education Mode

  10
• 2.10 Back Panel of the Instrument

  10
• 3 Quick Start Guide

  11
• 3.1 Setting up and turning the instrument on

  11
• 3.2 Connection of a probe and signal capture

  11
• 3.3 Display of signal details

  11
• 3.4 Cursor Measurements

  12
• 3.5 Automatic Measurements

  12
• 3.6 Mathematical functions

  13
• 3.7 Storing data

  13
• 4 Vertical System

  14
• 4.1 Coupling

  14
• 4.2 Sensitivity, Y Positioning and Offset

  14
• 4.3 Bandwidth Limit and Signal Inversion

  14
• 4.4 Probe Attenuation and Unit Selection (Volt/Ampere)

  14
• 4.5 Threshold Setting

  15
• 4.6 Naming a Channel

  15
• 5 Horizontal System

  16
• 5.1 Acquisition modes RUN and STOP

  16
• 5.2 Time Base Settings

  16
• 5.3 Acquisition modes

  16
• 5.4 Interlace Mode

  19
• 5.5 ZOOM Function

  19
• 5.6 Navigation Function

  19
• 5.7 Marker Function

  19
• 6 Trigger System

  20
• 6.1 Trigger Modes Auto, Normal and Single

  20
• 6.2 Trigger Source

  20
• 6.3 Trigger type

  21
• 6.4 Trigger Events

  23
• 7 Signal Display

  24
• 7.1 Display Settings

  24
• 7.2 Usage of the Virtual Screen

  24
• 7.3 Signal Intensity Display and Persistence Function

  24
• 7.4 XY display

  25
• 8 Measurements

  26
• 8.1 Cursor Measurements

  26
• 8.2 Automatic Measurements

  27
• 9 Analysis

  29
• 9.1 Mathematical Functions

  29
• 9.2 Frequency Analysis (FFT)

  30
• 9.3 Quick View

  31
• 9.4 PASS/FAIL Test based on Masks

  31
• 9.5 Component Test

  32
• 9.6 Digital Voltmeter

  33
• 10 Signal Generation

  34
• 10.1 Function Generator

  34
• 10.2 Pattern Generator

  34
• 11 Documentation, Storage and Recall

  36
• 11.1 Instrument Settings

  36
• 11.2 References

  36
• 11.3 Curves

  37
• 11.4 Screenshots

  38
• 11.5 FILE/PRINT Key Definition

  38
• 12 Mixed-Signal Operation

  39
• 12.1 Logic Trigger for Digital Input

  39
• 12.2 Display Functions for the Logic Channels

  39
• 12.3 Display of Logic Channels as BUS

  39
• 12.4 Cursor Measurements for Logic Channels

  40
• 12.5 Automatic Measurements for Logic Channels

  40
• 13 Serial Bus Analysis

  41
• 13.1 Software options (license key)

  41
• 13.2 Serial Bus Configuration

  41
• 13.3 Parallel / Parallel Clocked BUS

  42
• 13.4 I2C BUS

  42
• 13.5 SPI / SSPI BUS

  44
• 13.6 UART/RS-232 BUS

  45
• 13.7 CAN BUS

  47
• 13.8 LIN BUS

  48
• 14 Remote Control

  50
• 14.1 USB VCP

  50
• 14.2 USB TMC

  50
• 14.3 Ethernet

  52
• 15 Technical Data

  53
• 16 Appendix

  56
• 16.1 List of figures

  56
• 16.2 Glossary

  56