Manual Do Utilizadoríndice analíticoMaster Table of Contents8Safety2Section A - Installation9Section B - Operation17Section C - Accessories27Section D - Maintenance29Section E - Theory of Operation35Section F - Troubleshooting and Repair41Symptoms44Major physical or electrical damage.44The engine will not crank while using the electric start function.44Engine will not start. The starter motor will crank the engine normally.44The engine will not shut down.45The engine runs erratically or stops running.46Engine will not idle down. Weld and auxiliary outputs are normal.47Engine idles own but will not stay at low idle.47The engine will not go to high idle when a welding or auxiliary load is applied. Engine idles up normally and outputs are normal when the engine switch is placed in the “high” position.48No weld or auxiliary output –Engine runs normally.48There is no weld output, or weld voltage drops dramatically when trying to strike an arc. The 115/230 VAC auxiliary output isnormal; engine operate snormally.49No 115/230 VAC auxiliary output – Weld output is normal and engine operates normally.50Low weld and auxiliary output, the engine operates normally.50The welding arc is “cold” or weld performance is poor. Engine operates normally and auxiliary output is normal.51Section G - Electrical Diagrams95Tamanho: 5 MBPáginas: 98Language: EnglishAbrir o manual