Ez Access Mobility Aid ez-access 用户手册

- 8 - 

C) 

 

i) 

Place the surface of the platform face down, onto cardboard or a lawn so 
that the platform is not damaged (scratched or dented). 

ii) 

Places edges to be joined against one another. 

iii) 

Attach platform connector saddle bracket (two each) into existing threaded 
inserts using 5/16” x 1½” hex bolts (four per bracket) and 5/16" flat 
washers (four per bracket) as shown in FIG. 8.

 

:  Any two platforms with the same width can be connected. 

However, generally two 5' x 4’ platforms are connected to make a turn 
back platform. 

iv) 

FIG. 9 shows completed assembly. CAUTION: Although platforms are now 
connected, four support tubes must be installed per platform. 

 

 

 

- 25 -