Elica EVL43XS1 安装指导

THIS APPLIANCE IS FITTED WITH AN ELECTRICAL

JUNCTION BOX WITH 3 WIRES, ONE OF WHICH

(GREEN/YELLOW) SERVES TO GROUND THE

APPLIANCE. TO PROTECT YOU AGAINST

ELECTRIC SHOCK, THE GREEN AND YELLOW WIRE

MUST BE CONNECTED TO THE GROUNDING WIRE

IN YOUR HOME ELECTRICAL SYSTEM, AND IT

MUST UNDER NO CIRCUNSTANCES BE CUT OR

REMOVED.

Disconnect power.
Remove terminal box cover.
Remove the knockout in the terminal box and install a UL 

listed or CSA approved ½” strain relief.
Run home power supply wiring through ½” strain relief 

 

into terminal box. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Use UL listed wire connectors and connect white wires 

(B) together.
Use UL listed wire connectors and connect black wires 

(C) together. 

1.
2.
3.

4.

5.

6.

Electrical Shock Hazard 
Electrically ground blower. 
Connect ground wire to green and yellow ground wire 
in terminal box. 
Failure to do so can result in death or electrical shock. 

Connect green (or bare) ground wire from home power 

supply to the 2 yellow-green ground wires (D) in terminal 

box using UL listed wire connectors.
Tighten strain relief screw.
Install terminal box cover.
Reconnect power. 

 
Mounting the duct cover

Position the duct cover over the mounted hood.

Slide the bottom of the duct into the glass area.

Position the top of the duct over the duct mounting 

 

bracket. If a telescopic duct cover is used, grab the 

 

upper part of the telescopic duct cover, pull it and place it 

 

in the duct cover mounting bracket.

Secure the top of the duct with 2 assembly screws  

 

provided.

7.

8.
9.
10.

•

•

•

•

A

B

C

D

E

A. UL listed wire connectors

B.White wires

C. Black wires

D. Green (or bare) wire connected to

yellow-green wires

E. Home power supply