Elica EVL43XS1 安装指导
10
Control and features
This hood is equipped with an electronic motor and lamp
control. The control is able to set 3 different fan speeds,
turn ON/OFF light and has a timer function. In the following
drawing are described the main key functions.
Control panel description
1. Timer Key
The default timer setting is 10 minutes, and it can be
adjusted between 20 minutes and 1 minute.
After pressing the timer key, the control enters to a timer
setup mode, and user can adjust the timer countdown
time with the “-” and “+” keys within 5 seconds. The timer
can be initiated immediately pressing the timer key, after
setting the timer duration or pressing the timer key twice
(default 10 minutes setting).
If not action occurs within 5 seconds the countdown will start.
During the timer setup the “-” and “+” keys are dedicated
to the timer and no motor action will occur.
Once initiated the timer, it can be cancelled by pressing
the timer key again.
. Light Key
Press lamp key to turn ON the light (Lamp state
previously OFF).
Press lamp key to turn OFF the light (Lamp state
previously ON).
3. Display
Shows the hood settings.
4. “-” Key. Speed Decrease / OFF
This key is used to decrease the fan speed, or turn OFF the fan.
The fan will turn OFF if the “-” key is pressed and the
hood was in the first speed.
If the fan is at second speed and the “-” key is pressed,
the fan will be set to first speed.
If the fan is at third speed and the “-” key is pressed, the
fan will be set to second speed.
If the fan is OFF and the “-” key is pressed, the control
backlight will light up.
5. “+” Key. Speed Increase / ON
This key is used to increase the fan speed, or turn ON the fan.
The fan will turn ON if the “+” key is pressed and the
hood was OFF.
If the fan is at first speed and the “+” key is pressed,
the fan will be set to second speed.
If the fan is at second speed and the “+” key is pressed,
the fan will be set to third speed.
If the fan is at third speed and the “+” key is pressed,
a beep will sound.
Special functions
Clock programming
The clock can be reprogrammed at any time except
during an active timed function.
The clock can be displayed in a twelve hour format and
valid clock times are from 1:00 to 12:59.
The clock can be reprogrammed pressing the “Timer”
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Description of the hood &
Controls
Control panel
Cover Lamp
Grease filter release Handle
Grease filter
Duct cover
Duct cover grid
1.
2.
3.
4.
5.
6.
1 2 3