Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
6-3
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 6 Troubleshooting
System does not answer
Check the port group’s protocol table
Verify that the port group for any troubled port references the correct protocol table for the ISDN
protocol being interfaced to.
protocol being interfaced to.
Step 1
At the tech$ prompt, type
port
and press Enter. The “port” command menu in
appears.
Figure 6-1
port Command Menu
Step 2
Type
4
and press Enter to view the port group record. The second line in
appears.
Figure 6-2
View Port Group
Step 3
Type the appropriate port group number and press Enter. In this example, it is 0, so type
0
and press
Enter. The rest of
appears.
Step 4
Take note of the protocol table number. In this example, it is protocol table 50.
Step 5
Type
x
and press Enter to exit the “port” command utility.
meetingplace:tech$ port
***** P O R T / G R O U P C O N F I G M E N U *****
1) View port record(s)
2) Modify port record
3) Copy port records
4) View group record(s)
5) Modify group record
x) Exit program
Enter command: 4
Enter command: 4
Enter port group record number [0..31, <cr> for all] : 0
------------ GROUP 0 --------------
Activate the group? : y
Card type : E1
Signaling : Euro ISDN
Protocol table : 50
Number of DID digits : 0
Human assistance? : n
Flash transfer? : n
Outdial? : y
Enter command: x