Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
6-4
Cisco MeetingPlace Audio Server 5.2 for Cisco MeetingPlace 8106 Customer Engineering Guide
78-16411-01
Chapter 6 Troubleshooting
System does not answer
Step 6
Type
protparm
and press Enter.
appears.
Figure 6-3
protparm Command Menu
Step 7
Type
1
and press Enter to view the protocol parameter table. The second line in
appears.
Figure 6-4
Protocol Table Menu
Step 8
Type the appropriate protocol table number found in
and press Enter. In this example, it is
50, so type
50
appears.
Step 9
Type
2
and press Enter to view general information. A screen similar to
appears.
meetingplace:tech$ protparm
***** P R O T P A R M C O N F I G M E N U *****
1) View protocol parameter table(s)
2) Modify protocol parameter table
3) Copy protocol table
4) Delete protocol table(s)
x) Exit program
Enter command: 1
Enter command: 1
Enter protocol table number [0..99, <cr> for all] : 50
***** V I E W M E N U *****
1) View entire table
2) View general information
3) View incoming called party number processing (DDI)
4) View incoming calling party number processing (CLI)
5) View outgoing calling party information
6) View outgoing called party type of number (TON)
7) View outgoing called party numbering plan (NPI)
8) View outgoing private number definition
9) View outgoing local number definition
a) View outgoing long distance number definition
b) View outgoing international number definition
c) View outgoing Network Specific Facilities (NSF) codes
d) View outgoing NSF Carrier Identification Code (CIC)
x) Exit to main menu
Enter list command [table 50]: 2