Panasonic KX-MB2575 Operating Guide

DP-MB310:
– Up to 10 reservations when sending
– Up to 11 reservations when receiving
1. Set the original during fax reception or fax memory

transmission.

2. Enter the fax number using the dial keypad or

address book.

3. When using the scanner glass, press MxN. The unit

will scan 1 page. Place the next document on the
scanner glass and press MOKN. Repeat this until all
the documents are scanned, then press MxN.
When using the automatic document feeder
(y), press MxN.

R If the document exceeds the memory capacity, the

reservation for that document will be cancelled. You
must send the entire document manually.

Printing a sending report
A sending report provides you with a printed record of
transmission results. To print the sending reports, make
sure that feature #401 is activated (page 80). For an
explanation of the messages, see page 108.

Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 103. To print it automatically after every 30 new
fax transmissions and receptions, make sure feature
#402 is activated (page 80). For an explanation of the
messages, see page 108.

Sending a fax at a specific time (delayed send)
This feature allows you to take advantage of low-cost
calling hours offered by your telephone company. This
feature can be set up to 24 hours in advance of the
desired time.
1. If the MlN light is OFF, turn it ON by pressing MlN.
2. Set the original (page 38).
3. If necessary, change the resolution (page 61) and the

4. MtN A MBNM4NM1NM2N A M1N A “ON” A MOKN

R For models that support 2-sided scanning

(y):
To scan a 2-sided original, select the desired
binding of the original by pressing MCN or MDN
repeatedly. A MOKN
To scan a 1-sided original, select “OFF”. A
MOKN

5. Enter the fax number.

R To enter an item using one-touch dial feature

(y) and address book, see page 61.

6. MOKN
7. Enter the transmission start time.

R If you selected 12-hour time entry (page 25),

press MGN repeatedly to select AM or PM.

R If you selected 24-hour time entry (page 25), the

time is set using 24-hour time entry.

8. When using the scanner glass, press MOKN. A

MxN
When using the automatic document feeder
(y), press MOKN.
R The document will be scanned into memory. The

unit will then send the data at the specified time.
You cannot use this feature for another fax
transmission until the former sending is
completed.

Note:
R To cancel this setting after programming, press

MwN while the unit is idle, and then press MOKN.

Important:
R Make sure the quick scan feature is activated

1. Set the original (page 38).
2. Enter the fax number. A MxN

Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number 2 or more times.

Note:
R To stop sending, see page 104.

You can send the same document to multiple parties (up
to 20). To use this feature, store the fax numbers into
broadcast memory (page 59).
R Make sure that the MlN light is ON.

If necessary, change the resolution (page 61) and the
contrast (page 61).

When using the address book
1. MWN
2. Press MCN or MDN repeatedly to select

“<BROADCAST1>”, “<BROADCAST2>” or
“<BROADCAST3>”. A MxN

When using the broadcast key (y)
Press one of broadcast key (1-3).
R If you already register telephone number in

one-touch dial, press MCN or MDN repeatedly to
select “<BROADCAST1>”, “<BROADCAST2>” or
“<BROADCAST3>”. A MxN

When using the scanner glass, the unit will scan 1
page. Wait until “SCAN:PRESS OK” “SEND:PRESS
START” is displayed. Place the next document on the

62