ONKYO PR-RZ5100 Owner's Manual

|

•  Reliable operation with an HDMI-DVI adapter is not 

guaranteed. In addition, video signals from a PC are not 

supported.

■ Images flicker

•  It is possible that the resolution of the player is not 

compatible with the TV's resolution. If you have 

connected the player to this unit with an HDMI cable, try 

changing the output resolution on the player. There also 

may be an improvement if you change the screen mode 

on the TV.

■ Video and audio are out of synch

•  Video may be delayed relative to audio depending on 

the settings and connections with your television. To 

adjust, press Q on the remote controller, and adjust in 

"Other" - "A/V Sync" in the "Quick Menu".

■ There is no linked operation with CEC compliant 

•  In the Setup menu of the unit, set "Hardware" - "HDMI" - 

"HDMI CEC" to "On".

•  It is also necessary to set HDMI linking on the CEC 

compliant device. Check the instruction manual.

■ Radio reception is poor or there is a lot of noise.

•  Re-check the antenna connection.

•  Relocate your antenna.

•  Move the unit away from your TV or PC.

•  Passing cars and airplanes can cause interference.

•  Concrete walls weaken radio signals.

•  Listen to the station in mono.

•  When listening to an AM station, operating the remote 

controller may cause noise.

•  (Models with built-in amplifiers only) You can improve 

reception sensitivity by changing the setting in 

"Miscellaneous" - "Tuner" - "AM Noise Cut Mode" in the 

Setup menu if you are finding AM broadcasts difficult to 

hear.

•  FM reception may become clearer if you use the 

antenna jack on the wall used for the TV.

•  Try plugging/unplugging the power of the unit and try 

turning on/off the BLUETOOTH enabled device. Re-

startup of the BLUETOOTH enabled device may be 

effective.

•  The BLUETOOTH enabled devices must support the 

A2DP profile.

•  Near components such as microwave oven or cordless 

phone, which use the radio wave in the 2.4 GHz range, 

a radio wave interference may occur, which disables the 

use of this unit.

•  If there is a metallic object near the unit, BLUETOOTH 

connection may not be possible as the metal can effect 

on the radio waves.

Check the following if the above does not fix the problem:

■ Cannot connect with this unit

•  Check that the BLUETOOTH function of the 

BLUETOOTH enabled device is enabled.

■ Music playback is unavailable on the unit even after 

•  When the audio volume of your BLUETOOTH enabled 

device is set low, the playback of audio may be 

unavailable. Volume up the BLUETOOTH enabled 

device.

•  Depending on the BLUETOOTH enabled device, Send/

Receive selector switch may be provided. Select Send mode.

•  Depending on the characteristics or specifications of 

your BLUETOOTH enabled device, playback on the unit 

is not guaranteed.

■ Sound is interrupted

•  Problem may be occurring at the BLUETOOTH enabled 

device. Check the information on the internet.

■ The audio quality is poor after connection with a 

The BLUETOOTH reception is poor. Move the 

BLUETOOTH enabled device closer to the unit or 

remove any obstacle between the BLUETOOTH 

enabled device and this unit.