Manual De UsuarioTabla de contenidosMaster Table of Content9Safety3Section A - Installation10Section B - Operation19Section D - Maintenance48Section E - Theory of Operation52Section F - Troubleshooting & Repair58Symptoms61The VRTEXTM 360 does not turn on when the On Switch is pushed. The green indicator light does not light.61The VRTEXTM 360 does not power up when the ON Switch is pushed. The green indicator light does come on but does NOT stay on when the ON Switch is released.62The VRTEXTM 360 does not power up when the ON Switch is pushed. The green indicator light does come on and stays on.63The Video Monitor does not function correctly. But the Helmet is working correctly and providing feedback information to the user.64The Display P.C. Board does not function correctly. The VRTEXTM 360 seems to work correctly.65Some of the User Interface Controls and/or Indicators do not function.65All of the User Interface Controls and Indicators do not function.65The user is not receiving any visual or audio feedback information in the helmet (FMD).66The VRTEXTM 360 does not function correctly in the SMAW(stick) mode. But it functions correctly in the VR GMAW mode.67The VRTEXTM 360 does not function correctly in the GMAW mode. It works correctly in the VRSMAW (stick) mode.68There is jitter or shaking in the Helmet display and Monitor.68The CPU constantly looses the current time and date. At initial boot-up the monitor reads “CMOS” battery failed.68As viewed through the helmet and the monitor, the entire stand assembly appears in the middle of the screen and the environment does not move.68The weld coupon image is a different configuration than the physical coupon.69The arm and/or table are different than the visuals in the software.69When the check settings are activated the incorrect settings appear.69Holding the green button in does not shut down the VRTEXTM 36069Sometimes the view in the helmet seems to shake, wobble or jitter.69The students' reports are notaccessible.70Previous weld pass data is not accessible on the LASER screen.70Some or none of the welding parameters, defects, or discontinuities are graphing on the LASER screen.70The user is not sure of which tolerances they are using.70Section G - Electrical Diagrams168Tamaño: 10 MBPáginas: 171Language: EnglishManuales abiertas