HP pavilion dv6500 6600 6700 Manuale Di Servizio
a
b
. Optical drive (see
)
c
. Switch cover (see
d
. Keyboard (see
e
. Speaker assembly (see
)
f
.
)
g
. Top cover (see
h
. Audio board (see
)
i
.
USB/power connector board (see
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
)
●
RTC battery (see
)
●
WLAN module (see
)
●
Bluetooth module (see
●
ExpressCard assembly (see
)
●
Fan/heat sink assembly (see
●
Processor (see
)
Remove the system board:
1
.
Remove the USB/power connector board cable (1) from the clips built into in the base enclosure.
2
.
Remove the two Phillips PM2.5×4.0 screws (2) that secure the system board to the base enclosure.
Component replacement procedures 83