Cisco Cisco ONS 15600 SDH Multiservice Provisioning Platform (MSPP) Guia Da Instalação

System Upgrade in progress (approximately 3 to 5 minutes)

Click the Maintenance tab and then click the Software button. The Download Status column shows the 
percentage of the completion of the upgrade progress.

Log out of CTC.

Restart CTC with the Software R8.0 version, using the same IP address used in Step 1.

Complete the 

 for all MS-SPRing nodes 

in the network.

Complete the 

.

Repeat Steps 1 through 

 for any other nodes you want to downgrade.

Restoring the database of the Software R9.0 version from the Software R8.0 version is not supported.

This procedure assumes you are upgrading using Release 6.x TL1 syntax. TL1 commands issued prior 
to software activation to Software 9.0 will vary in syntax depending on the release you are actually 
upgrading from. To ensure that your syntax for each command is correct, use the TL1 syntax supplied 
in the Cisco ONS SDH TL1 Command Guide for your particular release when issuing the following 
commands:

ACT-USER

APPLY

CANC

COPY-RFILE

REPT EVT FXFR

OPR-PROTNSW-<STMN_TYPE>

RTRV-COND-ALL

This procedure upgrades the node software to Software 9.0 using TL1, 
rather than CTC.

PC or UNIX workstation

Optional

Onsite or remote (but in the presence of the workstation)

Superuser