Cisco Cisco IPS 4520 Sensor 릴리즈 노트

Click Deploy in the popup and follow the instructions.

For a list of sensors that are supported by CSM 4.3 and sensors that are supported by CSM 4.3 SP1, see 

.

This section describes how to reimage the sensor using the system image, and contains the following 
topics:

This procedure is for the IPS 4240, but is also applicable to the IPS 4255. The system image for the 
IPS 4255 has “4255” in the filename. 

You can install the IPS 4240 and IPS 4255 system image by using the ROMMON on the appliance to 
TFTP the system image onto the compact flash device. 

To install the IPS 4240 and IPS 4255 system image, follow these steps:

Download the IPS 4240 system image file to the tftp root directory of a TFTP server that is accessible 
from your IPS 4240. 

Make sure you can access the TFTP server location from the network connected to the Ethernet 
port of your IPS 4240.

Boot the IPS 4240.

Booting system, please wait... 

CISCO SYSTEMS 

Embedded BIOS Version 1.0(5)0 09/14/04 12:23:35.90

Low Memory: 631 KB

High Memory: 2048 MB