Manuels d'utilisation pour Beckett CULUS CF1400

Table des matières

• General Information

  3
• Hazard Definitions

  3
• Specifications

  3
• Owner’s Responsibility:

  3
• Service Agency Responsibility:

  3
• Pre-Installation Checklist

  4
• Combustion Air Supply

  4
• Clearances

  4
• Fuel Supply

  4
• Nozzle Pressure

  4
• Electrical Supply

  5
• Vent System

  5
• Verify Burner Components

  5
• Verify Firing Rate

  5
• Verify Air Tube

  6
• Stray Light

  6
• Dust and Moisture

  7
• Mount the Burner

  7
• Mount Flange(s) on Air Tube

  7
• Mount Air Tube to Burner

  8
• Install Nozzle

  8
• Check Electrode Settings

  8
• Install Nozzle Line Assembly

  8
• Set “Z” Dimension

  9
• Insert Burner

  9
• Fuel Unit By-pass Plug

  9
• One-pipe Oil System By-pass Loop

  10
• Oil Supply/Return Lines

  10
• Burner Fuel Flow

  10
• Wire the Burner

  11
• Typical Burner Sequence of Operation - 7505 Control

  11
• Typical Burner Sequence of Operation - 7184B Control

  14
• Restricted Lockout

  14
• Prepare the Burner for Start-up

  15
• Start-up checklist

  15
• Z Dimension

  15
• Adjusting Plate Assembly

  15
• Initial Head Position

  16
• Initial Air Settings

  17
• Set Appliance Limit Controls

  17
• Prepare the Fuel Unit for Air Venting

  17
• Start the Burner

  18
• Start Burner and Vent Air From Oil Line

  18
• Disable Function

  18
• Cad Cell Resistance Measurement:

  18
• Operating the Burner

  19
• Set High-fire Air

  19
• Set Low-fire Air

  19
• Annual Service

  20
• Monthly Maintenance — by Owner

  20
• UL listed to comply with ANSI/UL296 Replacement Parts

  20
• Accepted by N.Y.C. M.E.A. Limited Warranty Information

  24