用户手册 — FieldServer FS-RA-CLX-BAS

目录

• INTRODUCTION

  4
• About this product

  4
• PRE-STARTUP CHECKLIST

  5
• Accessories supplied with the SlotServer

  5
• Third party components (not supplied by FieldServer Technologies)

  5
• Required configuration for the SlotServer

  5
• STEPS FOR IMPLEMENTATION OF A SLOTSERVER PROJECT

  6
• Read the SlotServer Instruction Manual

  6
• Install the SlotServer in a ControlLogix Rack.

  6
• Write the SlotServer configuration

  6
• Install the FieldServer Utilities

  6
• Load the SlotServer Configuration into the SlotServer

  6
• Program the ControlLogix CPU to communicate with the SlotServer.

  6
• Commission the third party network.

  6
• SLOTSERVER INSTALLATION

  7
• SlotServer Ports and Displays

  7
• Inside Cover Door Label

  9
• Technical Specifications

  9
• SLOTSERVER TOPOLOGY

  10
• CONFIGURING THE CPU INTERFACE TO THE SLOTSERVER

  11
• CPU interface Description

  11
• Configuring the SlotServer as a Logix I/O Server

  11
• Data Arrays/Descriptors

  11
• Server Side Connection Descriptors

  12
• Server Side Node Descriptors

  12
• Server Side Map Descriptors

  13
• 6.6.1. SlotServer Specific Map Descriptor Parameters

  13
• 6.6.2. Driver Specific Map Descriptor Parameters

  13
• 6.6.3. Map Descriptors Example

  14
• INTERFACE

  15
• Step 1: Establish an RSLogix project

  15
• Step 2: Add and configure the SlotServer as an IO Module

  16
• Step 3: Write Ladder Program to get Input Data from Data Arrays

  17
• Step 4: Write Ladder Program to Send Output Data to Data Arrays

  20
• Step 5: Download the RSLogix Program and Run

  20
• Step 6: Set up the third party connection

  20
• INTERFACES

  21
• Multiple Input Data Arrays

  21
• Accessing Multiple Output Data Arrays

  21
• APPENDIX A. ADVANCED TOPICS

  23
• Appendix A.1. Description of Data Transfer Process

  23
• Appendix A.2. The IO image header

  25
• Appendix A.3. How to obtain Node Status from the SlotServer

  25
• Appendix A.4. Dealing with ControlLogix RPI Settings

  26
• Appendix A.5. Installing SlotServer on a Remote Rack using CNB Cards

  27
• Appendix A.5.1. Hardware and Software requirements

  27
• Appendix A.5.2. Setup

  27
• Appendix A.5.3. RSLogix configuration

  27
• Appendix A.5.4. RSNetWorx configuration

  28
• Appendix A.5.5. Testing

  29
• Appendix A.5.6. Connection limitations -Controlling the SlotServer using ControlNet

  30
• Appendix A.6. Rules for Naming Logix driver Data Arrays

  31
• APPENDIX B. TROUBLESHOOTING TIPS

  33
• Appendix B.1. Things to check when communications fail.

  33